UNDERSTAND YOUR CARE · KNOW WHEN TO CALL
Infusion pumps: electronic, syringe and ambulatory systems
Infusion pumps deliver a prescribed amount of medicine over a planned time. The pump controls delivery; the cannula, port or central line provides the route into the body. Understanding both helps you recognise a problem early.
Medical Content & Review —
Dr Hakeem Ansar Hussain
Medical Oncologist
Patient education · Updated 15 October 2026
For adults receiving cancer care. Children and people with specialised devices need an individual care plan. Your treating team’s instructions take priority.
When to seek urgent help
Contact the infusion team immediately for a persistent alarm, interruption, unexpected finish time, leak, wet dressing, burning, swelling or pain. Chest pain, breathlessness, collapse or a severe reaction needs emergency care.
If you cannot reach your treatment team promptly for urgent symptoms, go to emergency care. Take your cancer-treatment and device records. During chemotherapy, a temperature of 38°C or above, shaking chills or sudden illness needs immediate contact; follow a lower threshold if your team specifies one.
Which system might be used?
An electronic volumetric pump moves fluid from a bag through tubing. A syringe pump delivers smaller volumes from a syringe. Ambulatory pumps are designed to be carried during treatment away from the unit. An elastomeric pump uses an elastic reservoir rather than an electric motor. These systems are selected for the medicine, volume and treatment schedule; they are not interchangeable by patient choice.
A pump can deliver chemotherapy, supportive medicines or other treatment. The same-looking equipment may contain very different drugs. Check the medicine name and planned duration with your nurse.
Before the infusion starts
- Staff confirm your identity, prescription, allergies and treatment eligibility.
- Ask what is being infused, how long it should take and which symptoms need immediate attention.
- The nurse checks the line and secures the connections. Report tenderness, swelling or a loose dressing before starting.
- For home use, demonstrate the checks you have been taught and confirm the emergency contact, return time and supply plan.
What does an alarm mean?
An alarm can signal a kink, an empty container, air detected in the system, a battery problem or another interruption. It does not identify the cause on its own. In the unit, call the nurse. At home, use the supplied device-specific instructions and contact the infusion service if the cause is unclear or the alarm persists.
Only perform the checks you have been trained and authorised to do. Do not change the rate, bypass an alarm, open the pump housing or repeatedly restart the infusion. Never flush a painful or blocked line to make the pump run.
Moving, sleeping and bathing
Keep the pump supported in its approved holder with enough slack in tubing to move safely. Avoid trapping tubing under your body or pulling it while dressing. Keep the device and electrical connections dry, and use the bathing method recommended for your particular pump and access device.
Ask about battery changes or charging only if applicable. Take spare supplies when instructed. Before travel, discuss treatment fitness, pump requirements and access to a suitable medical unit.
Finishing treatment safely
The displayed volume or an empty bag does not give permission to remove the line. Staff or a specifically trained person must complete the planned disconnection and line care. Report an infusion that appears to finish unexpectedly early, runs late or stops. The team decides how to account for any missed medicine; never speed up a later infusion yourself.
Frequently asked questions
Does a running pump prove my line is safe?
No. Leakage or a line problem can occur while the pump continues to run. Symptoms and site checks still matter.
Can I silence an alarm and wait?
Ask for help promptly. Follow only the alarm actions taught for your exact device; silencing it does not resolve the cause.
Before going home: a printable checklist
- I know the purpose and name of my procedure or device.
- I have the written care or feeding plan, and have practised the tasks I am expected to do.
- I know which symptoms need urgent help and have the 24-hour contact.
- I know who provides supplies and where follow-up care happens.
- My next review, maintenance or removal date is recorded.
Ask your team: What improvement should I expect? What are my alternatives? Which activities can I resume? What should I do if the plan cannot be followed at home?
Sources and further reading
Source resources checked 15 October 2026. Device instructions and the treating hospital’s individual plan take precedence for care schedules, volumes and technical steps.